Camera Accessibility Functions

To always enable the screen reader function, press and hold the MENU button on the initial setup screen, which is displayed on the external monitor after you turn the camera on for the first time. The screen reader function will be enabled.
Once you use the screen reader function on the initial setup screen, the screen reader function will be kept enabled after the initial setup, and you can switch on and off for the screen reader function by pressing and holding the MENU button.
The MENU button is located on the rear side of the camera, slightly above the center, and is the rightmost of three buttons in a horizontal row.
If you have not used the screen reader function on the initial setup screen, you can enable the function from the MENU.
On the MENU screen, configure the following settings:
Select (Setup) → Accessibility → Screen Reader → Screen Reader → On

On the MENU screen, configure the following settings:
Select (Setup) → Accessibility → Screen Reader → Speed → Sets the speed when reading aloud.

On the MENU screen, configure the following settings:
Select (Setup) → Accessibility → Screen Reader → Long Press to Switch → On

On the MENU screen, configure the following settings:
Select(Setup) → Accessibility → Enlarge Screen → Enlarge Menu Scrn → On (Button)

On the MENU screen, configure the following settings:
Select(Setup) → Accessibility → Enlarge Screen → Magnification → Select the magnification to use for the function to enlarge the screen display.

On the MENU screen, configure the following settings:

1. Select (Focus) → Focus Assistant → Focus Magnifier
2. Press the center of the control wheel to enlarge the image and select the area you want to enlarge using top/bottom/left/right side of the control wheel.

On the MENU screen, configure the following settings:
Select (Focus) → Focus Assistant → Focus Map → On

On the MENU screen, configure the following settings:

1. Select (Focus) → Subject Recognition → Subject Recog in AF → On
2. Select (Focus) → Subject Recognition → Recognition Target → Select a subject.

On the MENU screen, configure the following settings:
To assign a function to a button or dial, select (Setup) → Operation Customize → Custom Key Setting or Custom Key Setting