Applicable Model

This information is for the following models:

  • ILME-FX6V

About this download

Benefits and Improvements

Notes:

  • For customers using the Content Browser Mobile app:
    • After the update, you will not be able to use the monitoring function in the Content Browser Mobile app.
    • Please install the Monitor & Control app (Ver. 2.0 or later) to continue using this feature after the update.
  • Improves the operational stability of the camera

Note: For more information on previous software versions, please contact a Sony service representative.

Previous Benefits and Improvements

File Info

  • Name: BODYDATA.DAT
  • Version: 5.02
  • Size: 574 350 704 bytes
  • Release Date: 10-09-2024

Preparation

This document describes how to update the ILME-FX6 camera system software.

  • The version update data is first saved to an SD card or CFexpress Type A memory card.
    Note: Referred to as a CFexpress card(s) in this document.
  • The camera is then updated using the screen menu.
    Note: Refer to the Operating Instructions of the camera for details on how to use the menu.

Checking the Current Software Version

Follow the steps below to display the software version of the ILME-FX6:

  1. Select Version.
  2. Select Version Number in the Maintenance menu.

Notes About Updating

  • When updating the software, always connect the supplied AC adaptor to the camera. If a battery pack is attached at the same time, the update will continue even if the AC adaptor is subsequently disconnected.
  • Remove any connected devices (such as USB devices, SDI/HDMI cables, microphones, and shoe accessories), and eject any media cards that are not necessary for the update.
  • When using an SD card, choose an SDXC memory card.
  • Use an SDXC or CFexpress card that has been formatted in the memory card slot using the camera’s formatting function.
    Note: Refer to the Operating Instructions of the camera for more details on the formatting function and supported SDXC/CFexpress cards.

Saving the Version Update Data to an SDXC Card or CFexpress Card

  1. Connect the formatted SDXC or CFexpress card to a computer.
  2. Download the version update data from the download site, then save the data on your computer.
  3. Save the data in the root directory of the SDXC or CFexpress card.
    Note: Do not change the file name.

Updating the System Software Version

Before you start:

  • Do not perform any of the following actions while updating the system software as they could cause the update to fail and the camera to stop working:
    • Removing/inserting the SDXC or CFexpress card
    • Turning the camera off
  • Refer to the Operating Instructions of the camera for more details.

Follow the steps below to update the system software version:

  1. Insert the SDXC or CFexpress card that contains the saved version update data into slot B of the camera.
    Note: Only slot B will recognize the version update data.
  2. Select Version.
  3. Select Version Up in the Maintenance menu.
    Note: Version Up cannot be selected if the version update data cannot be found.
  4. Select Execute.
    Note: After performing this step, a Please use the AC Adapter message will appear.
  5. Select Execute on the version update confirmation screen.
    Note: After performing this step, a Version Update VX.XX > VY.YY message will appear.
    (X.XX: current version number, Y.YY: newest version number)
  6. Select Execute on the version update confirmation screen again.
    • The version update will start and the access indicator will flash.
      Note: The process takes approximately 8 minutes to complete. However, the time varies depending on the old and new update versions.
    • When the version update is successfully completed, the access indicator will stop flashing and the unit will restart automatically.
  7. Check that the software version has been updated (see the Checking the Current Software Version section of this document).
    Note: If the system software has not been updated to the latest version, check the version update procedure, and then perform the update procedure again from step 1.

IMPORTANT: If you experience an update issue, such as a black screen that is displayed for 15 minutes or longer, the following steps may help resolve the issue:

  1. Set the unit power switch to OFF, disconnect and reconnect the power cord, and then set the power switch to ON.
  2. Check the version update procedure, and then perform the update procedure again from step 1.
  3. If the version update issue persists and the update is not successful, there may be a problem with the camera. In this case, please contact a Sony service representative for further assistance.

Sony SupportILME-FX6V

ILME-FX6 System Software (Firmware) Update Ver. 5.02 (SD card/CFexpress card)